The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Inject valve for Green Gas powered magazines used in WE/KJW and Socom Gear pistol and carbine replicas.
Overall length: 13 mm
Tip diameter: 4.2 mm
Thread diameter: 4.9 mm
Tube diameter: 4 mm
Weight: 1 g
Manufacturer: Arma Tech
Name LiPo 7,4V 2000mAh 15/30C Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, Arcturus, it's also compatible with AEG in Tokyo Marui standard. NOTE! This magazine requires a loading tool or Speedloader to fill it up. Mid-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first...
28 rounds capacity double-stack magazine with a base pad for fast, smooth, positive reload. NOTE! Magazine dedicated to the R5XX and R6XX (Hi-Capa / 2011) series replicas by Army Armament nad Baba Yaga by SRC.
Magazine pouch can hold 7.62/.308 style magazines (HK417/G3/SR25/M14/AK47/FAL/SCAR-H/SSR) and 5.56/.223 (G36) or many other accessories. Compatible with all MOLLE platforms. Weight: 220 g Material: 600D polyester
This protector will protect your Scope - Red Dot from damage.
V2 gearbox frame with quick spring change system, processor unit with built - in MOSFET system. Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Made by low carbon steel wire material. Offer well protection and cool look. Ballistic Protection: Approx. 500 FPS with 6mm 0.20g BB. Adjustable elastic strap. Suggested to use with goggle for best protection. Perfect for airsoft.
Weight: 5 g Material: steel
o avoid an excessive cells discharging is advisable to use LiPo alarm. When dangerous limit voltage level per cell will be reached LiPo alarm gives sound. Model Number 2s 3s 4s voltage display, l, Measuring Range 0.5-3,6v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-3-4s
The replica was made of high-quality metal and polymer. Metal parts include the slide of the replica while the frame was made of polymer. The top of the slide features comfortable iron sights with a fiber-optic front sight. The replica is powered by a 12 g CO2 capsule, installed directly in a magazine. The magazine itself is a two-row kind, which allows...
25-round Green Gas metal magazine. Dedicated for WE-TECH M9/92FS series.
Color: white Weight: 0,30g Dimensions: 5,96 +/- 0,01mm Double polishing Manufacturer: Rockets™
Made by high density nylon. Enhance the speed of magazine change. Keep the empty magazine for reloading later. Able to attached to any molle webbing vest, bag, duty belt or backpack. Color - MB
Inject valve for Green Gas powered magazines used in WE/KJW and Socom Gear pistol and carbine replicas.
Overall length: 13 mm
Tip diameter: 4.2 mm
Thread diameter: 4.9 mm
Tube diameter: 4 mm
Weight: 1 g
Manufacturer: Arma Tech
